No need for water cooling, large heat capacity

Calliper disc type sufficiently cooled by air cooling.

The rotor adopts impeller structure, from the inner circumference of the cold air into the brake.

Thus, the heat generated is effectively released to the outside.

The initial cost and the operating cost required without water cooling

It causes a drop. In addition, there is no need to maintain water leakage, water stains, etc.

No maintenance costs.

(2) Wide torque control range (large 1:880)

Because the caliper uses diaphragm, so low working pressure.

In addition, combined with the number of caliper operations, the torque control range is significantly wider.

You can control more than 1:880.

Small inertia, light weight

The rotor has light weight and little inertia.

④ Friction plate replacement, seconds

No tool required, just pull the fixing pin to replace the friction plate.

The key can be replaced.

Non-asbestos friction sheet is adopted